Henan Yunyu Mechanical Equipment Co., Ltd.
Model No.: YB20
Material: Stainless Steel
Connection Form: Flange
Driving Mode: Manual
Nominal Pressure: JIS10-20K
Channel: Angle Type
Structure: Floating Ball Valve
Type: Floating Ball Valve
Function: Relief Valve
Temperature: Normal Temperature
Application: Water Industrial Usage, Industrial Usage
Packaging: standard export packaging
Place of Origin: China
HS Code: 8481
Three Piece Internal Thread Ball Valve
One and three piece internal thread ball valve
Q11F three-piece internal thread ball valve is divided into one-piece, two-stage and three-stage. The valve body casting adopts advanced technology introduced from Taiwan, with reasonable structure and beautiful appearance. Valve seat adopts elastic sealing structure, reliable sealing and easy opening and closing. straight valve, Lifting Check Valve, Swing Check Valve,
Butterfly Valve, Wafer Type Butterfly Valve,Pressure Gauge Valve,
The valve stem adopts a bottom-down structure with an inverted seal. When the valve chamber is raised abnormally, the stem will not be washed out.
The three-piece ball valve connection type has additional butt welding (BW) socket welding (SW), and all can be equipped with international standard ISO bracket platform and locking device. A 90° switch positioning mechanism can be set, and locks can be added as required to prevent erroneous operation. The drive mode is manual, electric, and pneumatic.
The use of different materials can be applied to various media such as water, steam, oil, nitric acid, and acetic acid. Three-piece internal thread ball valve and butt welded ball valve are suitable for PN1.0~4.0MPa, working temperature is -29~180°C (sealing ring is reinforced PTFE) or -29~300°C (sealing ring is for aligning On the various pipelines of benzene, used to cut off or connect the medium in the pipeline
Second, Q11F three-piece ball valve structure features:
1. Fluid resistance is small.
2. Simple structure, relatively small size, light weight and easy maintenance.
3. Good sealing performance.
4. Without limitation of the installation direction, the flow of the medium can be arbitrary.
5. No vibration, low noise.
Third, Q11F three-piece internal thread ball valve standard specification:
Design and manufacturing standards: GB/T 12237-2007
Structure length standard: GB/T 12221-2005
Socket welding standard: GB12224, ANSIB16.25
Pressure temperature rating: GB/T 12224-2005
Test and inspection standards: GB/T 13927-2008
Copyright © 2019 Henan Yunyu Mechanical Equipment Co., Ltd. All rights reserved.