Soft Seal Gate Valve with Lock
The soft-sealed gate valve with lock has a strong feature of preventing the valve from being turned on and off by itself. It can be effectively prevented from being stolen by installing it on the tap water pipe or other pipelines; the valve body of the soft-sealed gate valve with lock can be prevented by the powder epoxy resin coating. Valve body corrosion and rust, and can be used in sewage systems.
First, with a soft seal valve features:
A lock device is equipped on the soft seal valve with lock. Adjusting Valve, Ammonia Valve, Chlorine Valve, Safety Valve, gate valve, Check Valve, Ball Valve, Each lockable soft seal valve can be used with the same key switch. Different key switches can also be used. It has a simple operation and is easy to use. The soft seal valve with lock has a strong prevention. The characteristics of the private switch valve, installed on tap water pipes or other pipes, can effectively avoid stealing.
1 Sealed soft-sealed gate valve with integral encapsulation: The valve plate is made of high-quality rubber for internal and outsourced rubber, and the domestic first-rate rubber vulcanization technology enables the vulcanized valve plate to ensure precise geometric dimensions, and rubber and ductile iron valve gates The board is firmly connected. Not easy to fall off and good elastic memory.
2 Corrosion-resistant gate valve with lock Corrosion resistance: The valve body is coated with powder epoxy resin to prevent corrosion and rust on the valve body and can be used in sewage systems.
3 The soft seal valve with lock is not easy to crack: In the past, the traditional cast iron gate valve often caused by foreign objects hitting, collision or overlap caused by the phenomenon of fracture. Since the valve is changed to ductile iron, this situation can be greatly reduced.
4 O-ring seals with soft seal gate valve: Due to the use of three [O" ring seals, the valve stem seal design can reduce the frictional resistance during switching, drastically reduce the leakage phenomenon, and replace the seal ring without water. .
5 Soft-sealed gate valve with lock can help to drink: Because the interior of the valve body is coated with non-toxic epoxy resin, the inner and outer surfaces of the gate plate are completely covered with rubber so as not to cause rust or corrosion, and can be used for drinking.
6 Locked soft-sealed gate valve Casting valve body: The valve body is precision-cast, and the precise y~#-f dimension makes it possible to ensure the valve's tightness without any finishing inside the valve body.
7 Locked soft-sealed gate valve Light weight: The valve is made of spheroidal graphite and weighs approximately 20% to 30% less than conventional gate valves. Easy to install and maintain. Switch valve, installed on the water pipe fire road.
Second, the use of soft lock sealing valve range of use
Soft-sealed gate valves with locks can be used in industries such as urban water supply and drainage networks, residential water supply management, district heating management, landscaping, and oil products.
Looking for ideal Soft Seal Gate Valve Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the WCB Seal Gate Valve are quality guaranteed. We are China Origin Factory of WCB Gate Valve with Lock. If you have any question, please feel free to contact us.
Product Categories : Gate Valve